Suntrip Installation

 

Instructions to install a vinyl adhesive sticker on a car in 5 steps:

1. Clean the windshield thoroughly with glass cleaner and dry completely, focusing on the top area where the sunstrip will be applied.
   
   
2. Position the sunstrip along the top of the windshield without removing the protective backing, ensuring it's centered and level with the windshield frame.
   
   
3. Carefully peel away a small section of the protective backing from one end of the sunstrip.
   
   
4. Apply the exposed section first, then gradually remove more backing while pressing the sunstrip down firmly with a squeegee or soft cloth, working from center outward to eliminate air bubbles.
   
   
5. Allow the sunstrip to cure for at least 24-48 hours before using wipers or exposing to extreme temperatures for optimal adhesion.